Prodigy Pocket Bedienungshandbuch PDF herunterladen (Seite 17)

PRODIGY Pocket® Blood Glucose Meter PRODIGY

Pocket® Blood Glucose Meter

Owner’s Manual Owner’s Manual

Important: Be sure that you are in control

solution mode so that the test result will not be

stored in the meter memory.

STEP 4: Apply Control Solution

1. Check the expiration and discard dates on

your control solution and test strip vials.

2. Shake the control solution bottle well, then

remove cap.

3. Squeeze the bottle and discard the rst drop

then wipe the dispenser tip with clean tissue

paper or cotton.

4. Squeeze the bottle again to

get a second drop onto a

clean, non-absorbent surface

or on your clean ngertip. See

Figure 18.

5. Bring the tip of the test strip

to touch the drop of solution

until the meter beeps.

Figure 18

Caution: To avoid contaminating the control

solution with the content of the test strip,

DO NOT DIRECTLY APPLY CONTROL SOLUTION

ONTO THE TEST STRIP. See Figures 19 and 20.

STEP 5 : Check if the Test Result is in Range.

After seven (7) seconds, the control solution

test result appears on the display. Compare the

test result with the range

printed on the test strip vial.

Each vial of Prodigy

Coding Test Strips may have

a different control solution

range. The result should fall

within the printed range on

the test strip vial.

See Figure 21.

Figure 19 Figure 20

Figure 21

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

Keine Kommentare

Prodigy Pocket Bedienungshandbuch Seite 17