
Prodigy Diabetes Care, LLC www.prodigymeter.com
PRODIGY
®
Blood Glucose Meters Owner’s Manual
16
17
Prodigy Diabetes Care, LLC 1.800.243.2636
PRODIGY
®
Blood Glucose Meters Owner’s Manual
STEP 5 : Check if the Test Result is in Range.
After Seven (7) seconds, the control solution
test result appears on the display.
Compare the test result with the range
printed on the test strip vial. Each vial
of Prodigy
®
No Coding Test Strips may
have a different control solution range.
The result should fall within the printed
range on the test strip vial.
See Figure 6.
Out of Range Results
If the result is not within the printed
range, the meter and/or test strips may
not be working properly. Repeat the control solution test.
Out of range results may occur due to:
• damaged or expired test strips
• contaminated or expired control solution
• a meter malfunction
• not following the directions
If test results continue to fall outside the range printed on the test
strip vial, check “Troubleshooting Guide” located in the “System
Troubleshooting” section.
Expiration or Damage
Prodigy
®
No Coding Test Strips and Control Solutions have expiration
datesprintedontheirlabels.Whenoneoftheseisrstopened,you
must record the discard date (date opened plus three (3) months) in
the space provided.
Figure 6
Caution: Do not use test strips or control solution that have
exceeded the discard date, are expired or have been damaged.
Your results may be inaccurate.
Contact Customer Care
If your test strips have been damaged or if you continue to get out-of-
range results, it means that the system or the control solution may not
be working properly. DO NOT use the system to test your blood glucose
level. If you are unable to resolve the problem, contact Customer Care
at 1.800.243.2636.
Kommentare zu diesen Handbüchern