Prodigy Autocode Bedienungshandbuch Seite 15

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 24
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 14
Diagnostic Devices, Inc. www.prodigymeter.com
Prodigy Talking Meter Owner’s Manual
28
29
Diagnostic Devices, Inc. 1.800.243.2636
Prodigy Talking Meter Owner’s Manual
If not, do not try to add more blood to the test strip.
Discard the test strip and retest with a new one.
If you have trouble filling the test strip,
pleasecontactTechnicalSupportforassistance.
Caution: DO NOT:
•Smearorscrapethebloodonto
the test strip.
•Applybloodtotheteststrip
when the test strip is out of
the meter
•Putbloodorforeignobjectsintothe
test strip slot.
STEP 3: Read Your Result
Youwillhearavoicemessage,
“Blood glucose is (number) (unit).”
After the meter counts down from 6 to 0, your
blood glucose test result appears along with the
unit of measure, date and time. The speaker
will announce the test result. This blood
glucose result is automatically stored in the
meter memory. Turn the meter off by removing
the test strip. Discard the used test strip
carefully to avoid contamination. See Figure 34.
Important: If you do not apply a blood sample within
(5)veminutes,themeterwillautomaticallyturnoff.
Youmustremovetheteststripandre-insertitagain
to turn on the meter and restart the test procedure.
Performing a Blood Glucose Test
STEP 1: Insert the Test Strip
Insert a test strip with the contacts bar end
entering into the test slot first. Push the test
strip as far as it will go without bending it.
The meter turns on automatically. See Figure
31.
STEP 2: Apply Blood Sample
Youwillhearavoicemessage,
“Please apply blood onto the strip.”
When the meter shows the “ ” apply blood
to the opening of the absorbent channel of
the test strip where it meets the narrow
channel. Blood will be drawn into the test
strip. See Figure 32.
The test strip confirmation window should be
completely filled before the meter begins to
count down. The meter will keep inidicating
the confirmation window is full.
See Figure 33.
Figure 34
Figure 31
Figure 32
Figure 33
Seitenansicht 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare